Circuit-test DMR-1100 Uživatelský manuál stáhnout pdf (Strana 6)

2.8. ON-BOARD SWITCH OPTIONS

All options are controlled by an 8-position DIP switch.

a) Message Repeats - S1, S2 - The basic operation

of the unit is to Play and then Pause. Switches

allow multiple plays (up to 4 plays per command):

the sequence is Play, Pause, Play, etc., for the

requisite number as provided by the switches.

There will always be a Pause between the Plays.

b) Pauses - S3, S4, S5 - Switches 3-5 select the

nominal pause time between successive message

plays. The pause period can be set for 1, 3, 5, 7,

10, 15, 20 or 30 seconds.

c) When On, Switch 6 is used to inhibit the

VOICECHECK functions.

d) When On, Switch 7 is used to inhibit the AUTO

TEST functions. (See 9, Auto Test below.)

e) If Switch 8 is placed in the ON position,in the event

of an error, the system will automatically reset after

a one minute delay. If Switch 8 is left in the OFF

position, the ERROR/FAIL indication will continue.

The unit must be manually reset by a

STOP/RESET command.

2.9. AUTO TEST

The DMR-PD-006 is programmed to self test

approximately once a minute. If any malfunction is

detected in the microprocessor, audio memory or audio

circuits, the ERROR/FAIL relay contacts will open.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

Žádné komentáře

Circuit-test DMR-1100 Uživatelský manuál Strana 6